Metal Vertical Hit and Miss Complete Engine Model Gas Stirling Engine with Hand Start Device
Engine Startup Steps:
1. Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three AA batteries (not included) to close the bottom plate.
2. Fill the fuel tank with gasoline (95). When the filling is completed, make sure there is no air in the oil pipe.
3. On the right side of the engine, slowly turn clockwise to buy more than one turn, its role can make the mixed gasoline fully enter the cylinder.
4. Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine.
Precautions:
1.If the ignition device is normal and the cylinder is normal, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted.
2.Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio.
3.Check if the water tank lacks water. If there is air in thecooling pipe, the pump can’t work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. Screw the screw.
4.When the machine stops, the power switch should be turned.
Specifications:
.Material: Metal + Wood
.Product Size: 18 x 12.5 x 22cm
.Product Weight: 1610g
Package Content:
.1 x Gas Engine Model
.1 x Hand Start Device
Make sure this fits by entering your model number.
UPGRADED VERTICAL ENGINE MODEL: Added a mechanical water pump, cooling water tank, it can carry out water cooling cycle.
PARAMETERS : Engine size: 180 x 125 x 220mm. Cylinder diameter: 22mm. Stroke: 20mm. Displacement: 6CC. Revolution: 1200rmp/min. Power supply: 3.7v. Fuel: gasoline.
HAND START MODEL: The outer pulley is easy to start by hand. You will love this exquisite horizontal gasoline engine model. Flywheel inner pulley can realize functions such as power generation or pump pumping.
MATERAIL: The gasoline engine is elaborately made of all metal, and the surface is polished to make it very smooth. The engine is fixed on the wooden base, the structure is stable and reliable.
WONDERFUL GIFT: A great gift for Kids science project, physical or mechanical learning, teacherâ€s Demo props on the class, birthday gift for friends, families, parents, kids, etc. Kids should be accompanied by adult.
Reviews
There are no reviews yet.